Parking Sensors and Keyless Entry Detectors

PicoScope's Parking Sensor and Keyless Entry Detector are inexpensive sensors that can quickly diagnose faults in these systems.

Ultrasonic Parking Sensor Detector

PICO-PA329 Parking Sensor Probe

This 2-meter long lead with a detector is intended to allow a technician to prove the correct operation of each of the ultrasonic parking sensors in turn. By directly showing the strength of the signal from a given sensor, it can also be used to identify problems with the masking of sensors due to the fitment of aftermarket accessories such as tow bars or lights.

Please Note that the colours on the product you receive may differ from those shown.

Keyless Entry Carrier Signal Detector

PICO-TA330 Keyless Entry Sensor Probe

The PICO-TA330 is a 3-meter long lead and detector intended to allow a technician to detect the presence of the keyless entry carrier frequency in the range 125-140 kHz (as used by most manufacturers). The device has a short range by design, allowing the technician to check each pickup coil in turn and hence identify a faulty unit. The detector does not pick up or decode the high-frequency secure information used to unlock the vehicle.

Please Note that the colours on the product you receive may differ from those shown.

PICO-TA329 Parking Sensor Probe
PICO-TA330 Keyless Entry Sensor Probe
PICO-TA329 Ultrasonic Parking Sensor Detector 2m
Ultrasonic Parking Sensor Detector 2m
PICO-TA329
R 844.42
PICO-TA330 Keyless Entry Detector 3m
Keyless Entry Detector 3m
PICO-TA330
R 844.42

Watch - Parking Sensor Test - AT814

Pico Automotive Parking Sensor Test Steve Smith of Pico Technology demonstrates the Guided Test used for ultrasonic parking sensors.