Name: 4225A 2-Channel Standard Kit in Case
Brand: PicoScope Automotive
SKU: PICO-PQ177
Price: 47524.90 ZAR
Availability: InStock

4225A 2-Channel & 4425A 4-Channel Standard Kits

The 2 and 4-Channel Standard Kits allow you to perform many more tests than the Starter Kits because they have both the 60A and 2000A Current Clamps, a COP Probe and a Secondary Ignition Pickup as well as many more accessories.

A Carry Case is also provided or you can choose to store your kit in Foam.

You can expand your Kit as necessary thereby increasing the number of tests you can perform by purchasing extra accessories.

Along with the 2 and 4-Channel PicoScope, you also receive our award winning PicoDiagnostics software. It includes a Battery Test which tests the starting and charging system on the vehicle. This is used to test batteries and charging systems by both vehicle manufacturers and independent workshops.

4225A 2-Channel Standard Kit Contents
1	4225 2-Channel Automotive Oscilloscope
1	PicoBNC+ Test Lead: 4mm Permanent Ground 3m Blue	1	PicoBNC+ Test Lead: 4mm Permanent Ground 3m Red
1	PicoBNC+ 60A Current Clamp	1	PicoBNC+ 2000A Current Clamp
1	ATC / ATO Fuse Extension Lead	1	Mini Fuse Extension Lead
1	PicoBNC+ COP Probe	2	PicoBNC+ Secondary Ignition Pickup
1	S-Hook	1	Back-pinning Probe Set
1	Multimeter Probe (Black)	1	Multimeter Probe (Red)
2	4mm Shrouded to Unshrouded Adaptor (Red)	1	PicoBNC+ 10:1 Scope Probe
1	Battery Clip (Black)	1	Battery Clip (Red)
2	Flexible Back-pinning Probe (Black)	2	Flexible Back-pinning Probe (Red)
1	Small Crocodile Clip (Black)	1	Small Crocodile Clip (Red)
1	HT Extension Test Lead	1	Earth wire for Coil Pack 45cm
1	1.8m USB Cable - Blue	1	Carry Case

4425A 4-Channel Standard Kit Contents
1	4425 4-Channel Automotive Oscilloscope
1	PicoBNC+ Test Lead: 4mm Permanent Ground 3m Blue	1	PicoBNC+ Test Lead: 4mm Permanent Ground 3m Red
1	PicoBNC+ Test Lead: 4mm Permanent Ground 3m Green	1	PicoBNC+ Test Lead: 4mm Permanent Ground 3m Yellow
1	PicoBNC+ 60A Current Clamp	1	PicoBNC+ 2000A Current Clamp
1	ATC / ATO Fuse Extension Lead	1	Mini Fuse Extension Lead
1	PicoBNC+ COP Probe	2	PicoBNC+ Secondary Ignition Pickup
1	S-Hook	1	Back-pinning Probe Set
2	Multimeter Probe (Black)	2	Multimeter Probe (Red)
4	4mm Shrouded to Unshrouded Adaptor (Red)	1	PicoBNC+ 10:1 Scope Probe
2	Battery Clip (Black)	2	Battery Clip (Red)
4	Flexible Back-pinning Probe (Black)	4	Flexible Back-pinning Probe (Red)
2	Small Crocodile Clip (Black)	2	Small Crocodile Clip (Red)
2	HT Extension Test Lead	1	Earth wire for Coil Pack 45cm
1	1.8m USB Cable - Blue	1	Carry Case

Example Tests

Compression Test	Lambda	Throttle Servo	Primary Ignition
Cylinder Balance	MAF Sensor	Pressure Regulator	SAW Signal
Battery Alternator Test	MAP	Camshaft Adjuster	Secondary HT
Alternator	Pedal Sensor	EGR	DIS Ignition
Starting Volt/Amps	Road Speed	Glow Plugs	Coil-on-plug
ABS	Solenoid Valve	Injectors	DIS Primary Voltage vs. Current
Camshaft	Throttle Position	Speed Control Valve	Cam vs. Crank Position Sensors
Temperature Sensor	Knock Sensor	Valve Timing	Primary Ignition vs. Crank
Crankshaft	Cooling Fan	Amplifier Earth	Primary Ignition vs. Injector (4-Channel Scope)
Distributor Pick-Up	Fuel Pump	Amplifier Signal	Cam, Crank, Injector and Ignition (4-Channel Scope)
Fuel Pressure	Stepper Motors	Primary

Please have a look at our comprehensive list of Automotive Guided Tests.
NB Some tests may require additional accessories that may not be supplied with these Kits.