4225A 2-Channel & 4425A 4-Channel Standard Kits
The 2 and 4-Channel Standard Kits allow you to perform many more tests than the Starter Kits because they have both the 60A and 2000A Current Clamps, a COP Probe and a Secondary Ignition Pickup as well as many more accessories.
A Carry Case is also provided or you can choose to store your kit in Foam.
You can expand your Kit as necessary thereby increasing the number of tests you can perform by purchasing extra accessories.
Along with the 2 and 4-Channel PicoScope, you also receive our award winning PicoDiagnostics software. It includes a Battery Test which tests the starting and charging system on the vehicle. This is used to test batteries and charging systems by both vehicle manufacturers and independent workshops.
|Compression Test||Lambda||Throttle Servo||Primary Ignition|
|Cylinder Balance||MAF Sensor||Pressure Regulator||SAW Signal|
|Battery Alternator Test||MAP||Camshaft Adjuster||Secondary HT|
|Alternator||Pedal Sensor||EGR||DIS Ignition|
|Starting Volt/Amps||Road Speed||Glow Plugs||Coil-on-plug|
|ABS||Solenoid Valve||Injectors||DIS Primary Voltage vs. Current|
|Camshaft||Throttle Position||Speed Control Valve||Cam vs. Crank Position Sensors|
|Temperature Sensor||Knock Sensor||Valve Timing||Primary Ignition vs. Crank|
|Crankshaft||Cooling Fan||Amplifier Earth||Primary Ignition vs. Injector
|Distributor Pick-Up||Fuel Pump||Amplifier Signal||Cam, Crank, Injector and Ignition
|Fuel Pressure||Stepper Motors||Primary|
NB Some tests may require additional accessories that may not be supplied with this kit.